do not scale from this print unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] tolerances do not apply to reference dimensions. 6qcd-xxx-xx.xx-xxx-xxx-x-x no of positions -026, -052, -078, -104 (per row) length -xx.xx (inches) (03.75[95.3] min) (see note 2) (see note 8) first end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 2) -teu: terminal, edge mount, up -ted: terminal, edge mount, down (see table 5 & sheet 4) -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 11 & sheet 5) second end wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 9, sheet 6) -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 3) -teu: terminal, edge mount, up -ted: terminal, edge mount, down (see table 5 & sheet 4) -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 11 & sheet 5) -f: screw option first end only -s: screw option second end only -b: screw option both ends -n: no caps (see fig. 3, sheet 6 for edge mount end options) (see fig. 4, sheet 6 for double vertical end options) (see fig. 5, sheet 6 for no caps option) (leave blank for standard caps both ends) end option length: xx.xx + "l" ref (see table 4) .570 14.49 ref (typ) .845 21.47 ref (typ) "a" ref (typ) "b" ref (typ) length: xx.xx 01% c1-b-gr c2-d-et c3-d-et 'a' sub-6qcd-x-xxx-xx-xx c n (see table 3) n-1 (see table 3) n (see table 3) n-1 (see table 3) sub-6qcd-x-xxx-xx-xx 01 02 01 sts-01 (tighten to 1.4 - 1.7 in-lbs) (4 plcs) 02 first end second end .294 ref (typ) 7.47 * "c" ref this product manufactured with lead-free processing pb qdp-xx-01 qdp-xx-02 sub-tcf-3850-26-01-xx.xx (see table 1 for qty) length ref detail 'a' scale 2.5 : 1 hdrl-11 (see note 5) c c c * -dv end options only vertical (6qcd-052-xx.x-str-str-1 shown) fig. 1 sheet of material: .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 1 sheet scale: 1:0.8 c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-tcf length is equal to 6qcd length. 3. all assemblies to be 100% electrically tested for shorts and opens. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-tcf not shown in this view for clarity; hdrl-11 to be centered on lower sub-tcf as shown; hdrl-11 is to contain part number, shop number, & date code. 6. for sub-assembly and finished good packaging requirements, reference packaging standard co-hd-wi-3033-m. 7. parts to be processed per samtec accetpability requirements: hdr-pi-01 "cable assembly workmanship shtandards" 8. cable lengths longer than 40.00 inches are not supported by s.i. test data. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l
n-1 n t26 t1 1 2 t b t1 t26 1 2 n n-1 t b n-1 n b1 b26 1 2 t b b26 b1 1 2 n n-1 t b 1 2 t26 t1 n-1 n t b t1 t26 n-1 n 2 1 t b 1 2 b1 b26 n-1 n t b b26 b1 n-1 n 2 1 t b first end - vertical (see table 9, sheet 6) -ttl -ttr -stl -str -tbl -tbr -sbl -sbr sheet of .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 2 sheet scale: 1.25:1 revision l c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
n-1 n t1 t26 1 2 t b t26 t1 1 2 n n-1 t b n-1 n b26 b1 1 2 t b b1 b26 1 2 n n-1 t b 1 2 t1 t26 n-1 n t b t26 t1 n-1 n 2 1 t b 1 2 b26 b1 n-1 n t b b1 b26 n-1 n 2 1 t b second end - vertical (see table 9, sheet 6) -sbl -sbr -stl -str -ttl -ttr -tbl -tbr sheet of .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 3 sheet scale: 1.25:1 revision l c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
t1 t26 b t n n-1 1 2 n n-1 1 2 b1 b26 b t n n-1 1 2 t26 t1 b t n n-1 1 2 b1 b26 b t "e" ref "d" ref length: xx.xx + "l" ref(see table 4, sheet 1) qdp-xx-03 (typ) .422 10.72 ref sub-6qcd-t-xxx-03-xx first end - edge mount (see table 9, sheet 6) second end - edge mount (see table 9, sheet 6) -ted -teu -ted -teu edge mount (no captive panel screws) (6qcd-026-xx.xx-teu-stl-x shown) (same as fig. 1, unless otherwise stated) fig. 2 sheet of .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 4 sheet scale: 1:1 revision l c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
t1 t26 t b n n-1 01 02 b1 b26 t1 t26 b1 b26 t b 01 02 n-1 n 02 n n-1 01 t b t b 01 02 n n-1 "s" "r" (see table 4, sheet 1) length: xx.xx + "l" ref qdp-xx-03 (typ) .422 10.72 sub-6qcd-s-xxx-03-xx -sed second end - edge mount (see table 9, sheet 6) -seu -sed -seu first end - edge mount (see table 9, sheet 6) fig. 2a edge mount (no captive panel screws) (6qcd-026-xx.xx-sed-stl-x shown) (same as fig. 1, unless otherwise stated) sheet of .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 5 sheet scale: 1:1 revision l c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"f" ref "g" ref .500 12.70 ref (typ) (fully tightened) "h" ref cps-4-40-01-x (typ) qdp-xx-03-cps (typ) "k" ref "j" ref .140 3.56 ref (typ) .296 7.52 (typ) qdp-xx-02-sdo qdp-xx-01 "p" ref .220 5.59 ref (see table 10) "m" (see table 10) "n" sub-tcf-3850-xx-01-xx.xx sub-6qcd-x-xxx-xx-xx sub-6qcd-x-xxx-03-xx apply uv epoxy to all cable ends (height not to exceed .050[1.27] above pcb surface) double vertical (with screw down option) (6qcd-026-xx.xx-str-xxx-1-f shown) (same as fig. 1, unless otherwise stated) fig. 4 edge mount (with captive panel screws) (6qcd-026-xx.xx-teu-xxx-1-f shown) (same as fig. 2, unless otherwise stated) fig. 3 (6qcd-026-xx.xx-teu-stl-x-n shown) (same as fig. 1, unless otherwise stated) fig. 5 l sheet of .635mm high-speed coax cable assembly by: 6qcd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 6 sheet scale: 1.25:1 revision l c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.635mm high-speed coax cable assembly sheet of by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing d. fraley 03/14/2006 7 7 sheet scale: 1.25:1 c:\enterprisevault\dwg\misc\mktg\6qcd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision l 6qcd-xxx-xx.xx-xxx-xxx-x-x
|
